EPDM
Epufloor BP
Double-layer, water-permeable surface with a thickness of 16 mm for running tracks.
View product
Pad
ET Pad
Flexible pad with a thickness of 35 mm for surfaces without concrete or asphalt substrate. A mixture of crushed aggregate, SBR rubber granulate and polyurethane adhesive.
No concrete needed
Thickness 35 mm
Flexible and stable variant
For AT and PU surfaces
Key benefits
If no concrete or asphalt substrate has been created, we recommend the so-called ET deck (pad) with a thickness of 35 mm.
The original terrain needs to be prepared with layers of aggregate, with the last layer of 0/4 mm fraction, only after this step can the ET pad be laid.
The ET pad is a mixture of crushed aggregate size 2-5 mm, SBR rubber granulate size 1-4 mm and polyurethane adhesive, which is created in a special mixer.
The substrate must be properly compacted.
The substrate must be laid at a temperature of 3°C above the dew point. Installation must not take place in excessive humidity or rain.
Specifications
| Total thickness | 35 mm |
| Flexible pad (for AT) - SBR granulate 1-4 mm | 15 kg/m² |
| Flexible pad (for AT) - Crushed aggregate 2-5 mm | 14,4 kg/m² |
| Flexible pad (for AT) - EPUFLOOR B354.00 | 2,6 kg/m² |
| Stable pad (for PU) - SBR granulate 1-4 mm | 13,7 kg/m² |
| Stable pad (for PU) - Crushed aggregate 2-5 mm | 23 kg/m² |
| Stable pad (for PU) - EPUFLOOR B354.00 | 2,3 kg/m² |
